Revision as of 07:51, 7 October 2011 by Admin (talk | contribs) (Created page with "left|40px|captionWhen boot is going to finish the power LED turns into steady blue. After a while (a minute or so) the power LED goes off and a LED bli...")
When boot is going to finish the power LED turns into steady blue. After a while (a minute or so) the power LED goes off and a LED blink sequence starts, that signals the IP of the Meteohub. When signaling is finished, power LED goes to steady blue again.
The IP consists of four numbers in the range of 0 to 255 seperated by dots. Meteohub signals each of the four numbers by sending for each digit of the number a seqence of short red blinks, where the number of blinks in the sequence represents the digit (1 = one blink, ..., 0 = ten blinks). Dots between number are represented by a blue blink. The example below explains how blinking for IP 192.168.0.23 would look like. Meaning of symbols is
- "_" stands for power LED off
- "R" stands for power LED red
- "B" stands for power LED blue
Sequence for 192.168.0.23 decomposes as follows:
(192.) ___R___R_R_R_R_R_R_R_R_R___R_R___B (168.) ___R___R_R_R_R_R_R___R_R_R_R_R_R_R_R___B (0.) ___R___R_R_R_R_R_R_R_R_R_R___B (23) ___R_R___R_R_R
